EasyManua.ls Logo

BEHA Unitest Hexagon 310 - Battery Replacement

BEHA Unitest Hexagon 310
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
69
ENGLISH
8.3 Batterie replacement
Prior to storage battery repla-
cement, disconnect the instru-
ment from any connected test
leads.
Only use batteries as descri-
bed in the technical data sec-
tion!
Z Please consider your environ-
ment when you dispose of
your one-way batteries or
accumulators. They belong in
a rubbish dump for hazardous
waste. In most cases, the bat-
teries can be returned to their
point of sale.
Please, comply with the res-
pective valid regulation regar-
ding the return, recycling and
disposal of used batteries and
accumulators.
If an instrument is not used
over an extended time period,
the batteries must be remo-
ved. Should the instrument be
contaminated by leaking bat-
tery cells, the instrument has
to be returned for cleaning
and inspection to the factory.
c Switch of the instrument.
c Loosen the screws on the instru-
ment rear.
c Lift the case cover.
c Remove the discharged batterie.
c Insert new batterie.
c Replace the case cover and
retighten the screws.
Batterie: 1 x 9 V, IEC 6LR61
Batterie replacement

Table of Contents