Mute Groups
1. To assign/remove a channel from a Mute Group, press the MUTE GRP button near the screen. You will know you are in
edit mode when the MUTE GRP button lights and the 6 Mute Groups appear on the 6 rotary encoders.
2. Now press and hold one of the 6 Mute Group buttons you wish to use and simultaneously press the select button of the
channel you wish to add/remove to that Mute Group.
3. When complete, press the MUTE GRP button again to reactivate the dedicated Mute Group buttons on the X32.
4. Your Mute Groups are ready to use.
To Next Page
Loading...
