Behringer X32 - 2. Callouts; 2.1 Channel Strip and Monitoring; Input Channel Banks

Routing Menu
1. The rst page of the ROUTING menu is where you choose which inputs the X32 will route to the 32 input
channels, (in banks of 8).
• Local = Internal Mic Preamp on back of console.
• Card Out/Card In = XUF Firewire/USB card, (or future expansion cards).
• AES50 = S16 or digital split via AES50 to/from another X32.
2. All of the other ROUTING pages refer to Outputs. Use the “page select” button to select these Output Tabs in order
to assign signals to the XLR & AUX outputs (individually), P16 Outputs, Card Outputs, and AES50 Outputs.
• When assigning AES50 & Card outputs, “OUT 1-8” and “OUT 9-16” will reect the outputs assigned on the
“Analog Out” tab.