Behringer X32 - Saving a Scene

Saving a Scene
1. Access the SCENE menu by pressing the “view” button.
2. Use the 4th rotary encoder below the screen to select a scene location number and click the encoder to save
into the selected slot.
3. Use the 5th encoder to save your scene directly to USB.
4. Pressing UTILITY in this menu will allow you to import / export scenes and entire shows via USB.
Note: The Scenes vs Shows: It should be noted that a “show” is an entire group of “scenes”. The X32 has
only one show loaded at all times, containing 100 scenes. If you import a “show” from USB, youwill
overwrite any “scenes” already loaded on the X32.