Another approach is to use a *.projectarchive file with the supported versions and make an
extract of that to the currently installed development version.
For details regarding the installation procedure of Image and CODESYS runtime use this link.
X2 image manual MAEN205
https://www.beijerelectronics.com/en/support/Help___online?docId=67122
Note!
The image upgrade consists of two parts, the EBOOT and the OS. When upgrading with the
image loader via ethernet the EBOOT version is not upgraded therefore it is always
recommended to use the option “Make recovery SD-card” to make sure that the EBOOT
version is upgraded to the correct one.
To Next Page
Loading...
