Beijer Electronics X2 Series User Manual

X2 series with embedded CODESYS control – Recommendations and limitations
SUEN00392E 2022-03
29 (61)
Normal.dotm
, 2020-09-09
Error checking
To check the communication status of a specific slave use the name of the slave as in the project
tree and the variable wState.
BFI_ETC_1.wState
An EtherCAT slave up and running should be in state 8.
Links
For more details of how to configure EtherCAT with the X2 series use the following links.
X2 Series and BFI
https://www.beijerelectronics.se/sv-SE/Support/Help___online?docId=68117
X2 series and G-series I/O
https://www.beijerelectronics.se/sv-SE/Support/Help___online?docId=68109
X2 series and BSD
https://www.beijerelectronics.se/sv-SE/Support/Help___online?docId=68088

Beijer Electronics X2 Series Specifications

General

Brand	Beijer Electronics
Model	X2 Series
Category	Controller
Language	English