Beijer Electronics X2 Series User Manual

X2 series with embedded CODESYS control – Recommendations and limitations
SUEN00392E 2022-03
8 (61)
Normal.dotm
, 2020-09-09
The CODESYS runtime is preinstalled with the following options:
1. EtherCAT without the support of distributed clock for LAN A
2. The Persistent function is Power fail mode.
CODESYS runtime 3.5.13.30.7 and device description file(s)
https://www.beijerelectronics.com/en/support/Help___online?docId=68403
Image loader v2.0 Build 367
https://www.beijerelectronics.com/en/support/Help___online?docId=68408
Installation of CODESYS runtime X2 control/X2 marine SC/BoX2 pro
SC (v1.5.1 Build 693)
At delivery of a X2/BoX2 series hardware with image version 1.5.1 build 693 or newer, the
CODESYS runtime is already installed. This can be verified by checking the welcome screen
down at the bottom left corner. This should state the installed CODESYS version (3.5.13.30.4)
bundled with the image version. (Check the compatibility chart for details)
For BoX2 series the image loader must be used to check the installed CODESYS version.
The CODESYS runtime is preinstalled with the following options:
1. EtherCAT without the support of distributed clock for LAN A
2. The Persistent function is Power fail mode.
CODESYS runtime 3.5.13.30.4 and device description file(s)
https://www.beijerelectronics.com/en/support/Help___online?docId=68234
Image loader v1.5.1 Build 693
https://www.beijerelectronics.com/en/support/Help___online?docId=68235
Installation of CODESYS runtime X2 extreme SC/BoX2 extreme SC
(v1.2.1 Build 287)
At delivery of a X2/BoX2 Extreme SC series hardware with image version 1.2.1 build 287 or
newer, the CODESYS runtime is already installed. This can be verified by checking the welcome
screen down at the bottom left corner. This should state the installed CODESYS version
(3.5.13.30.4) bundled with the image version. (Check the compatibility chart for details)
For BoX2 series the image loader must be used to check the installed CODESYS version.
The CODESYS runtime is preinstalled with the following options:
1. EtherCAT without the support of distributed clock for LAN A
2. The Persistent function is Power fail mode.
CODESYS runtime 3.5.13.30.3 and device description file(s)
https://www.beijerelectronics.com/en/support/Help___online?docId=68136
Image loader v1.2.1 Build 287
https://www.beijerelectronics.com/en/support/Help___online?docId=68135

Beijer Electronics X2 Series Specifications

General

Brand	Beijer Electronics
Model	X2 Series
Category	Controller
Language	English