Need help?Do you have a question about the Beijer Electronics Image Manual X2 base v2 and is the answer not in the manual?
General| Touchscreen | Yes |
|---|---|
| Power Supply | 24 V DC |
| Memory | 512 MB RAM |
| Communication Ports | 2 x USB, 1 x Ethernet, 1 x RS-232 |
| Operating Temperature | 0°C to 50°C |
| Protection Class | IP65 (front) |
| Display Type | TFT LCD |
| Storage Temperature | -20 to 60 °C |
Essential safety guidelines for installers and operators to read and understand the manual.
Explanation of symbols used to indicate safety hazards, important information, and helpful tips.
List of registered trademarks and trade names mentioned in the document.
List of related installation manuals and technical documentation for operator panels.
Overview of supported runtime versions and features for different panel families.
Description of the initial screen displayed upon powering the operator panel, showing status and options.
Accessing the service menu when no project is loaded on the panel.
Steps to access the service menu when a project is already present on the panel.
Configure IP address, subnet mask, default gateway, and DNS settings for the operator panel.
Set the time zone, date, time, and enable automatic daylight saving adjustment.
Modify the operator panel project or restore the panel image to a previous version using various methods.
Perform a self-test on the operator panel's hardware components.
Recalibrate the touch screen for accurate input.
Enable/disable debug logging and move log files to USB memory.
View detailed diagnostic information on status, hardware, and network, and export diagnostic data to USB.
Update the panel image using USB flash drives or SD-cards without a PC.
Upgrade the panel image using the Image Loader utility over an Ethernet connection.
Understand how panel image updates affect the iX Developer project.
To Next Page