Beijer Electronics Image Manual X2 base v2 User Manual

Boot
2Boot
2.1 WelcomeScreen
1.
Apply power to the operato r panel.
2.
Within 10–15 seconds, the Welcome Screen will appear.
The following items about theoperatorpanelarelisted:
• Size of internal memory card, if applicable
• IP address
• Panel image version
If a project has been downloaded to the panel, it will be loaded automatically.
If there is no project in the panel, touching the screen will display the Service
Menu.
If there is an SD card inserted into the panel, and the project on the SD card differs
from what is saved in the operator panel, then the user is asked if the project and
IP-settings should be restored.
Position Description
1Paneltype.
2 Networkstatus. Anattachednetworkcableisindicatedwithan
asterisk.
3 Panelimagemainversionandbuildnumber.
BeijerElectronics, MAEN352
7

Beijer Electronics Image Manual X2 base v2 Specifications

General

Brand	Beijer Electronics
Model	Image Manual X2 base v2
Category	Control Panel
Language	English