Service Menu
If the operator panel is equipped with two Ethernet ports, then a second tab is
shown in the IP settings dialog. The default setting for LAN B is “Obtain an IP
address via DCHP”.
3.4 Date/Time
Thedat e/timesettingsdialogallow ssetting
oftheTimezone,date,timeandalsosetting
automaticadjustmentofclockfordaylight
saving.
3.5 EditProject
Theeditproject/restoreimagedialogallo ws
modifyingtheprojectinanoperatorpane
l
and,ifneeded,restorethepanelimaget
oa
previousversion.
3.5.1 CopyProjectfromExternalMemory
This option enables the function to copy an iX Developer project from an external
memory, USB flash drive or storage device connected to one of the operator panels
USB-ports.
3.5.2 CopyProjecttoSDCard
This option enables the function to copy the iX Developer project and all the files
neededtoruntheapplicationtoanexternalSDCard.
BeijerElectronics, MAEN352
9
To Next Page
Loading...
Need help?
General