Beissbarth BAC 5100yf - Recover; Recover Refrigerant from a Vehicle

18
Recover Refrigerant from a Vehicle
1.Emptytheoildrainbottlebeforestartingarecovery.
Removetheoildrainbottlefromthemachineby
pullingthebottlestraightdown—donotusea
twistingorrockingmotion.RefertoFigure7.
Note: The machine sounds an alert when the oil drain
bottle is full, but it is a good practice to completely
empty the oil drain bottle before recovering an
A/C system.
2.Connectthehigh-side(red)andlow-side(blue)
hosestothevehicleA/Csystem.
3.Openthecouplervalvesonthehosesbyturningthe
collarsclockwise.
4.SelecttheRECOVERY functionbypressingthe
Recoverbuttononthecontrolpanel,orbyselecting
RecoveryfromtheRRRmenuasshowninFigure8.
Operating Instructions — Recover
Oil Drain
Bottle
WARNING: To prevent personal
injury while working with refrigerant,
read and follow the instructions
and warnings in this manual, and
wear protective equipment such as
goggles and gloves.
Press the
number on
the keypad
that
matches
the number
of the
function.
9
STOP ESC
OK
HELP MENU
DATABASE
Setup
Functions
RRR
Pressure Decay Leak Test
1
2
3
4
5
Esc
Another way to select
Recovery is by pressing
the RECOVER button on
the control panel.
Figure 8
Recovery
Vacuum
Charge
Automatic
1
2
3
4
Esc
Database
6
System Flush
Figure 7