Beissbarth BAC 5100yf - Hose Flush

21
BAC 5100yf Rev. A
Operating Instructions — Hose Flush
WARNING: To prevent personal
injury while working with refrigerant,
read and follow the instructions
and warnings in this manual, and
wear protective equipment such as
goggles and gloves.
Flushing the Hoses
Ifthenextvehicletobeservicedcontainsadifferent
typeofoilthanthepreviousvehicleserviced,itis
recommendedtheservicehosesbeushedofresidual
oiltopreventcontamination.
1.Connecttheservicehosestothemachine’sstorage
portconnections(showninFigure9).
2.Openthecouplervalvesbyturningthecollars
clockwise.
3.SelectHOSE FLUSHfromtheSetupMenu.The
machinedisplays
CONNECTBOTHSERVICEHOSES
TOSTORAGEPORTS
ANDOPENBOTHCOUPLERVALVES.
PRESSOKTOCONFIRM
4.SelectOK tobeginthehoseushprocess,which
runsforthreeminutes,followedbyarecovery.
5.Whenthehoseushingprocessiscompete,the
displayreads
HOSEFLUSHINGOK
PRESSOKTOCONFIRM
 PressOKtoconrmthedisplaymessages.
6.Closethecouplervalvesbyturningthecollars
counterclockwise.
7.PressOK toreturntotheSetupMenu.
Figure 9
Storage
Port
Connections