Belair 20E - Changing Wi-Fi Interface Admin State

BelAir20E User Guide Configuring Wi-Fi Radio Parameters
April 2, 2012 Confidential Page 79 of 255
Document Number BDTM02201-A01 Standard
Changing Wi-Fi
Interface Admin
State
/interface/wifi-<n>-<m>/set admin-state {enable|disable}
This command controls the state of the Wi-Fi interface including all links.
When set to enable , the Wi-Fi interface is in the operational state. When set to
disable , the Wi-Fi interface and all associated functions are disabled. The default
is disabled .
Use the /interface/wifi-<n>-<m>/show config command to view the current
admin state of the Wi-Fi interface.