Need help?Do you have a question about the Belanger Wave Across and is the answer not in the manual?
Crucial safety precautions and guidelines for operating the equipment safely.
Explains safety alert symbols and signal words used in the manual for hazard identification.
Lists different part numbers and descriptions for Wave Across models.
Lists tools needed for installation and equipment included in the package.
Details physical and utility requirements for the Wave Across system installation.
Specifies the physical output dimensions for vehicle clearance.
Provides graphical representation of the unit's physical dimensions and operating envelopes.
Details the process of placing and securing the head assembly to the support legs.
Instructions for positioning the assembled unit in its permanent tunnel location and leveling.
Guides the connection of water manifolds and electrical power supply to the unit.
Step-by-step instructions for installing the cloth strips onto the drive and follower racks.
Outlines daily, weekly, monthly, and semi-annual maintenance tasks for the equipment.
Highlights specific maintenance points, such as the correct placement of Mitter collars.
Provides detailed exploded views of various assemblies and components for identification.
Details the procedure and tools required for replacing the drive arm/rack connector bushing.
Crucial safety precautions and guidelines for operating the equipment safely.
Explains safety alert symbols and signal words used in the manual for hazard identification.
Lists different part numbers and descriptions for Wave Across models.
Lists tools needed for installation and equipment included in the package.
Details physical and utility requirements for the Wave Across system installation.
Specifies the physical output dimensions for vehicle clearance.
Provides graphical representation of the unit's physical dimensions and operating envelopes.
Details the process of placing and securing the head assembly to the support legs.
Instructions for positioning the assembled unit in its permanent tunnel location and leveling.
Guides the connection of water manifolds and electrical power supply to the unit.
Step-by-step instructions for installing the cloth strips onto the drive and follower racks.
Outlines daily, weekly, monthly, and semi-annual maintenance tasks for the equipment.
Highlights specific maintenance points, such as the correct placement of Mitter collars.
Provides detailed exploded views of various assemblies and components for identification.
Details the procedure and tools required for replacing the drive arm/rack connector bushing.
General| Brand | Belanger |
|---|---|
| Model | Wave Across |
| Category | Cleaning Equipment |
| Language | English |
To Next Page
