The programmer/clock
Setting the time of day
Before you do anything with your ovens, you must set the correct time of day.
This will enable you to make the most of all the ovens functions.
l Press the Up / Plus and Down / Minus buttons together for a few seconds, and
release.
l The ‘l’ in between the numbers on the LED Display will begin to flash.
l While the ‘l’ is flashing it is possible to adjust the time using the Up / Plus and
Down / Minus buttons. Once the time has been set, allow approximately 30 sec-
onds before using any of the other timer functions. This ensures that the time
will remain correct.
Setting an alarm tone
There are three tones to chose from.
l Press the
down / minus
button to listen to the first tone.
l Release the
down / minus
button and press it again to listen to the second tone
etc.
l Releasing the
down / minus
button after the tone has sounded will
automatically select that tone
To Next Page
Loading...
