Oven Timer Operation
12
Step 5
Turn off the oven control.
Step 6
Press the “ ” button to cancel the bleeping.
(If 2 minutes has not elapsed.)
Press “ ” button again to return to Manual
Operation.
Step 4
Press and release the “ ” button the display will
read 0.00 with the cookpot lit.
Within 2 seconds press and hold the “+” button until
the required cooking period is set.
(Adjustment can be made by pressing the “–” button).
The timer display will revert to the time of day with
the Auto symbol and Cookpot lit.
At the end of the cooking period the Auto symbol
will Flash and an intermittent bleeping sound will be
heard.
– This will continue for approximately 2 minutes
unless the timer is reset within this period (See Step
6).
To Set Timer To Switch OFF Automatically
This allows you to cook immediately for a chosen period before the oven
switches Off Automatically
Step 1 Ensure the time of day is set correctly.
Step 2 Place food onto the correct shelf position in the oven.
Step 3 Turn the oven control to the required temperature (Oven should now be
operating).
The oven will now no longer operate until the timer has been reset.
13.23
A
U
T
O
14.23
A
U
T
O
Cookpot Symbol Disappears
4866200099-01 Belling mf 637 27/11/2001 9:47 am Page 12
To Next Page
Loading...
