Belling 637 - Automatic Start and Switch-Off Timer

Oven Timer Operation
The oven will no longer operate until the timer has
been reset to manual operation.
Step 6
Turn off the oven control.
Step 7
Press the “ ” button to cancel the bleeping
sound. (If 2 minutes has not elapsed.)
Press “ ” button again to return oven to
“Manual Operation”.
16.20
13
Step 3
Press and release the “ ” button the display will
read 0.00 with the cookpot lit.
Within 2 seconds press and hold the “+” button
until the required cooking period is set.
(Adjustment can be made by pressing the “–”
button).
The timer display will revert to the time of day
with the Auto symbol and Cookpot lit.
Step 4
Press the release the “ ” button the display will
read the earliest possible end time with the Cookpot
and Auto symbol lit.
Within 2 seconds press and hold the “+” button to
set to the time you require the food to be ready,
with only the Auto symbol lit.
(Adjustment can be made by pressing the “–”
button).
1.20
13.23
A
U
T
O
16.20
A
U
T
O
To Set Timer To Switch ON and OFF Automatically
This allows you to cook at a specified time for a chosen period before the
oven switches Off Automatically.
Step 1 Ensure the time of day is set correctly.
Step 2 Place food onto the correct shelf position in the oven.
16.20
A
U
T
O
Step 5
Turn the oven control to the required temperature.
The oven will now switch on later in the day for the cooking period
required and will cut off automatically at the stop time setting.
At the end of the cooking period the Auto symbol will flash and an
intermittent bleeping sound will be heard.
This will continue for approximately 2 minutes unless the timer is reset
within the period.
4866200099-01 Belling mf 637 27/11/2001 9:47 am Page 13