Display and error messages
Please check the seal again.
The kitchen machine has an error in the electrical circuit.
Please contact 1300 373 199 for
Please switch the kitchen machine off
and wait a few minutes until the motor
The kitchen machine stops
when the whisk paddle is used.
The kitchen machine has a special control system. The speed can vary
and the rotation is interrupted in 2-second intervals. This means that the
kitchen machine starts making an unusual noise. This is normal. This
Remove part of the mixture or increase
the speed to a maximum of 3.
The speed is irregular or the
Increase the speed from 1 to 2 or from
The knife is working very slowly
There is smoke coming from
Allow the kitchen machine to cool down
Kitchen machine not working
with the temperature set and
The temperature can only be set for speeds 1 to 4.
Change the speed setting to 1 to 4.
function of the heat and humidity, while still forming a seal.
Rub a little cooking oil into the silicon seal
Is the kitchen machine used?
residual moisture on delivery.
with water and brought to the boil. As with a dishwasher, residual moisture
can be left behind. These residues can result in slight but perfectly safe
In order to remove the marks, please use
a conventional stainless cleaner, such as
strange noises. As in any electric motor, e.g. in a model railway or model
motorway, the engine uses brushes needs to be ‚run in‘ to begin with. The
noises are nothing to be concerned about.
Allow the kitchen machine to cool
down after it has been working hard,
machine will be fully operational again
The module beeps to tell you the kitchen machine has reached the right
The beeping also indicates that the
pre-set time has run out.
To Next Page
Loading...
