13
8. SAFETY ISSUES
Before starting to use the machine the user shall take into account his physical state,
qualification and complexity of tasks. Persons operating the woodworking machines must be
at least 18 years of age and must study the operating manual.
IT IS FORBIDDEN:
to work under the influence of alcohol or other intoxicating substances;
to expose the machine to dripping and splashing, as well as using it outdoors during rain
and snowfall;
to leave the machine unattended while it is connected to the supply mains;
to provide access to the machine to people, who do not have any professional knowledge
in this sphere;
to use the machine for purposes other than that intended;
to process metals, stones, asbestos-cement materials, soft plastic and rubberlike materials.
IT IS FORBIDDEN to use the machine if any of the following problems occur during its
performance:
damage of plug-and-socket connection, power cord;
damage of ground circuit;
if you smell fume or odor, typically occurring during burning insulation;
failing operation of the switcher;
formation of loud noise, hammering, vibration;
damage or cracks in the basic parts, fencings, casings.
The machine must be disconnected using the switch in case of spontaneous stop (during
rotating parts jamming, etc.). Always place the appropriate cover over the switch during work
breaks.
When connecting the machine it is recommended to use automatic safety fuse or fuse with a
rated current equal to 16А.
Use the plug to disconnect the machine from the supply system:
while changing the working tool (disc cutter, knifes, etc.), installing accessories or
adjusting;
while transferring the machine from one working place to another;
during work breaks, when the work is completed;
during technical maintenance;
while removing cutting wastes.
Power cord of the machine must be protected from accidental damage (it is recommended
to hang it). Direct contact of the electrical cord with hot and oily surfaces is forbidden.
While working outdoors it is permitted to use the original, app
ropriately marked extension
cord.
Always make sure that the workpiece does not contain nails or foreign objects.
When processing short and narrow pieces use a secure workpiece infeed (paragr. 8.6).
Do not wear too loose clothing and jewelry. They can get to the moving parts of the machine.
When working outdoors it is recommended to use gloves and slip-resistant footwear. Wear
appropriate personal protective equipment and head covering.
To Next Page
Loading...