Belmash SDM-2000 - Warranty Certificate

34
 saw blade fencing;
 end mill fencing.
The service life of the machine is no less than five years from the date of sale, under adherence
to the operating conditions and regular maintenance.
WARRANTY CERTIFICATE
Read this Warranty Certificate carefully; make sure that it is filled in.
Thoroughly check the product visual appearance and completeness. Claims on the visual
appearance and completeness shall be made immediately at the time of the product
acceptance.
If during the guarantee period any defects are detected, excluding the defects arising after
the handover of the products to the consumer due to violation of the transportation, storage
or use instructions by the latter, as well as actions of third parties or
circumstances beyond
one's reasonable control, we shall be obliged to satisfy the claims of the consumers in
conformity with the law and under the conditions as follows:
 The product warranty period is 24 (twenty-four) months from the date of the sale of the
product by the trading organization.
 This Warranty covers only the products used for private, household or domestic purposes,
unrelated to business activities.
 Claims on the machine quality are accepted if the defects are detected within the warranty
period.
During the warranty period, the defects arising due to the fault of the manufacturing plant
shall be eliminated free of charge.
List of the machine damages, due to which the warranty obligations are cancelled:
 disregard of operation instructions;
 mechanical damage, damages caused by aggressive environments, high temperatures,
ingress of foreign bodies;
 connection to the incorrect supply voltage;
 damages arising due to the reasons beyond the manufacturer’s control: power line
instability;
 the machine has been dismantled by the customer;
 self-directed replacement of units and parts, the design change;
 overload performance;
 damages due to improper storage (metal parts corrosion), severe contamination and
negligent operation;
 use of the machine for purposes other than intended;
 damages due to the circumstances beyond one's reasonable control (accident, fire, flood,
lightning stroke, etc.).
List of the parts not covered by the Warranty:
 circular saw blade;
 strap;
 planer knives;
 drill chuck;
 saw table plastic insert;