Belmash SDM-2000 - Declaration of Conformity ЕС;ЕЕА

3
This operating manual establishes machine service instructions and rules of safe operation.
Please read all instructions contained in this operating manual before using the machine.
The woodworking machines, if not operated safely, may endanger human life and health.
Hazardous exposure: noise, vibration, dust and cutting wastes, electricity.
Compliance with the requirements, specified in the operating manual, ensures safety while in
use and helps to avoid problems during operation and maintenance.
This operating manual does not reflects slight changes and modifications in machines, made
by the manufacturer after the publication of this manual, as well as changes in component
details and documentation attached to it.
1. DECLARATION OF CONFORMITY ЕС/ЕЕА
Joint limited liability company “Zavod Belmash” declares that multifunctional woodworking
machines
BELMASH SDM-2000
BELMASH SDM-2200
BELMASH SDM-2500
comply with the following requirements of EU Directives, including changes:
2006/42/EC Machinery (MD)
2004/108/EC Electromagnetic Compatibility (EMC)
2011/65/EURO HS Directive
A basis for concordance of the mentioned above devices with the EU Directives is their full
compliance with the applicable standards listed below:
EN 61029-1: 2009 + A11: 2011
EN 62233: 2008 (incl. Corr: 2008)
EN 55014-1: 2006 + A1: 2009
EN 55014-2: 1997 + A1: 2001+A2: 2008
EN 61000-3-2: 2006 + A1:2009+A2: 2009
EN 61000-3-3: 2008*
EN 61000-3-11: 2010**
01/222-1*
01/222-2**
_____________________________________________
* - for machines BELMASH SDM-2000
** - for machines BELMAS SDM-2200, BELMASH SDM-2500
Director _____________ D. V. Shorikov
Conformity certificates are stored at the address:
Zavod Belmash JLLC, Slavgorodskiy Proezd, 37 Republic of Belarus, 212000, Mogilev.