Bematech LR2000 User Manual

10
3.6.5.1 USB Interface
The driver will use a virtual printer port for USB (default USB001) and it
should be selected automatically during driver installation. After
installation has finished, please click “Yes” to print a test page to make
sure the printer is working.If you don’t see test pages printing after
installing the driver, please go to “Start -> Devices and printers -> LR2000
-> Printer Properties -> Port”, and select the USB001 port manually.
Sometimes it might be named USB002 if there are other devices that use
USB001 already).

Bematech LR2000 Specifications

General

Cutter	Yes
Bluetooth	No
Flash memory	- MB
Product color	Black
Maximum resolution	180 x 180 DPI
Autocutter durability	1 million cuts
Operating temperature (T-T)	0 - 50 °C
Mean time between failures (MTBF)	60000000 h
I/O ports	Standard USB Type B, DB9, RJ45, RJ11, 3-pin with latch
USB connector	USB Type-B
Standard interfaces	RJ-11, RJ-45, RS-232, Serial
Serial interface type	RJ-11, RS-232
USB 2.0 ports quantity	1
Connectivity technology	Wired
Maximum roll diameter	710 mm
Supported paper width	79.5 mm
Type	POS printer
Character sets	ASCII
Print technology	Thermal
Operating relative humidity (H-H)	10 - 90 %
AC input voltage	170-240 V
Power source type	AC

Weight and Dimensions

Depth	197 mm
Width	146 mm
Height	149 mm