11
3.3 INSTALLING THE SEAT
WARNING!
Inspect the product carefully to ensure that no breakage or
damage occurred during shipping. Assembling the product with
damaged, missing, or incorrect parts could result in serious
personal injury.
1. Place the seat assembly over the mounting brackets, aligning the holes as
shown. Install and securely tighten the bolts and ange nuts.
2. Route the seat safety interlock cable through hole in the wiring cover, then
connect to the plug on the mower.
3. Reinstall wiring cover, and ensure that it is securely seated.
Battery Quick-connect Plug
Wiring Cover
Tab
Wiring CoverSafety Interlock Cable
Steering Wheel Cover
Flange Nut
Flat Washer
Steering Wheel Hub
Bushing
Decorative Tube
Shaft
Bolt
Lower steering rod
Steering Wheel
Flange Washer
BM3775
To Next Page
Loading...
