35
7. TRANSPORTATION & STORAGE
WARNING!
Use extreme caution when towing the product. Keep all body
parts away from the blade while it is exposed.
NOTE
Use extra care when loading or unloading the product onto a trailer or
truck. Step on the brake pedal as needed to control the speed.
When loading or unloading the product, do not exceed the maximum
recommended operation angle of 15°.
Ensure the cutting deck is raised to the highest position so that it is not
caught on the ramp.
Transportation
1. Park the mower on a level surface.
2. Raise the cutting deck to the highest position.
3. Position and secure ramp to the trailer. Use one full width loading ramp that
is at least 1 ft. wider than the mower to minimize the risk of the mower’s
wheels going off the side of the ramp. Slowly drive the mower onto the
ramp and into the trailer.
4. Lower cutting deck completely.
5. Set the parking brake.
6. Turn off mower and remove key. Make sure that all moving parts have come
to a complete stop.
7. Secure the mower as needed using straps or cables to prevent movement
during transport.
8. Allow the product to cool down before transporting.
20%40% 60%80% 100%
RMO
OFF
ON
15° Max
BM3775
To Next Page
Loading...
