12
Adjusting the Seat
Before operating the riding mower, adjust the seat position to ensure that your feet
can step in the accelerator pedal or brake pedal rmly.
1. Sit down on seat and lift the seat adjustment lever.
2. While holding the lever, slide the seat to the desired position.
3. Release the lever and make sure the seat is locked in position.
3.4 INSTALLING THE STEERING COLUMN
1. Put the shaft into the lower steering rod to align the shaft and lower
steering rod mounting holes. After inserting the bolts, tighten them with
Wiring CoverSafety Interlock Cable
Steering Wheel Cover
Flange Nut
Flat Washer
Steering Wheel Hub
Bushing
Decorative Tube
Shaft
Bolt
Lower steering rod
Steering Wheel
Flange Washer
To Next Page
Loading...
