38
The mowing effect is
not good.
Side exhaust ducts
or openings are
blocked.
Clean side exhaust ducts or
openings.
Grass is wet. Wait until the grass is dry.
Mowing too fast. Reduce mowing speed.
The grass grows too
high.
Re-mowing the area where
thegrass is too high.
The blade stops
working while
mowing.
The position of the
cutter head is too
low.
Increase the height of the cutter
head.
The battery is too
low.
Charge the battery.
The blade does not
start.
The battery is too
low.
Charge the battery.
The motor switch
of the blade is not
turned on.
Turn on the blade motor switch.
Operator is not fully
seated.
The operator is fully seated in the
seat.
There are debris
in the cutter head
blocking the blade
from working.
Clean the bottom of the cutter
head.
The blade does not
work when retreating
to mowing.
RMO button is not
pressed.
Press the RMO button to enter the
backward mowing mode.
The motor switch
of the blade is not
turned on.
Turn on the blade motor switch.
Riding mower cannot
reach full speed.
The battery is too
low.
Charge the battery.
After the operator
is not activate the
parking brake and
leave the operating
seat, the blade
continued to work.
The security system
is not working
properly.
Contact an authorized dealer for
inspection and repair.
To Next Page
Loading...
