4
Always wear heavy-duty gloves when checking or clearing a blockage.
Keep blades sharp and guards in place and in working order.
The cutting blades continue to rotate for a few seconds after the motor
is shut off. When servicing the blades, be aware that even though the
power source is switched off, the blades can still be moved.
To prevent serious personal injury, prevent damage to the product, and
to maintain best performance, replace damaged, bent, cracked, or
unevenly worn out blades.
Make sure all nuts, bolts and screws at frequent intervals for proper
tightness to ensure that the product is in safe working condition.
Check the brakes before each use and frequently during use. Adjust and
service as required.
After each use, clean the product with a soft, dry cloth. Any part that
is damaged should be properly repaired or replaced by an authorised
service centre.
1.5 OTHER SAFETY TIPS
WARNING!
Clean all foreign materials from the product. Store the product in a cool,
dry, and well- ventilated place that is inaccessible to children.
Remove the stard key and store in a separate location out of the reach
of children.
Keep the product away from corrosive agents such as garden chemicals
and de-icing salts. DO NOT store the product outdoors.
To Next Page
Loading...
