BENDIX VORAD VS-400 User Manual

General Information
24
Diagnostic Trouble Code (DTC)
Isolation Procedures
Component Code: 25
(SA 42, SPN 898, FMI 13, 14)
SmartCruise
®
Adaptive Cruise Control Configuration Error
Overview
This code indicates that the VS-400 Forward Looking Radar (FLR) has detected a SmartCruise configuration or compatibility issue with the
engine.
Diagnostic Trouble Code (DTC) Detection
At power up, the FLR attempts to verify if the engine controller is SmartCruise
®
adaptive cruise control compatible and has its Adaptive
Cruise Control (ACC) setting(s) enabled. If the FLR determines that one of these conditions is false, this Diagnostic Trouble Code (DTC) is
set.
 • Code25,FMI13-EngineisnotconguredforSmartCruise
®
adaptive cruise control.
 • Code25,FMI14-EngineIDisnotrecognizedasSmartCruise
®
adaptive cruise control compatible.
Symptom
When this code is active, the Bendix
™
VORAD
®
VS-400 Collision Warning will continue to operate, but the Bendix
™
SmartCruise
®
adaptive
cruise control will not. The DIU will indicate SmartCruise
®
adaptive cruise control is not operational and the orange DTC light will be
illuminated.
Possible Causes
 • FMI13-TheenginecontrollersettingforAdaptiveCruiseControlisnotenabled.
 • FMI14-TheenginedoesnotsupporttheAdaptiveCruiseControlfunctionorisnotcompatiblewiththeVS-400system.

BENDIX VORAD VS-400 Specifications

General

Brand	BENDIX
Model	VORAD VS-400
Category	Automobile Accessories
Language	English