BENDIX VORAD VS-400 User Manual

Product Safety Information
4
General Information
Before You Begin
The VORAD
®
VS-400 system is comprised of a Forward Looking Radar (FLR) unit and Driver Interface Unit (DIU) that utilizes the vehicle’s
J1939datalinktocommunicatewitheachother,aswellasthevehicle’sengineand/orchassis(cab)controller.Itisrecommendedthatthe
servicing technician be properly trained and familiar with the vehicle’s electrical system, J1939 data link, and electronic components before
attempting any of the troubleshooting procedures in this manual.
For information on training opportunities, along with up to date service bulletins and product literature, contact your local Bendix account
manager or visit the Bendix website at www.bendix.com.
Additional Warnings
Some of the tests in this manual require the technician to use a test meter to measure the voltage and resistance of the vehicle’s electrical
circuits. If it becomes necessary to temporarily connect the test meter leads to wire harness terminals, it is recommended to use a test lead
adapterkit(seerecommendedtoolsforP/NJ-43318)orequivalent.
 • Neverinserttestleadprobes,nails,orpaperclipsintothevehicleharnessconnectorterminals,asthiscandistortordamagethe
wire terminals.
 • Neverpiercewireinsulationtotestcircuits,asthiscanresultindamagedwiresandwirecorrosion.
 • Whenmakingresistancechecksoncircuits,makesurethevehicleignitionisofftopreventdamagetotestequipmentandvehicle
components.

BENDIX VORAD VS-400 Specifications

General

Brand	BENDIX
Model	VORAD VS-400
Category	Automobile Accessories
Language	English