EasyManua.ls Logo

BendPak HD-9 - Page 64

BendPak HD-9
92 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
HD-9 Series Four-Post Lifts 64 P/N 5900123Rev. M February 2020
Lubricating the Lift
There are several lubrication points on the Lift. All of them are where Sheaves are located:
Inside of the Crosstube Gussets. One on each side of the Crosstube Gusset facing the
inside, for a total of eight.
Under the Cable Sheaves. One under each Double Cable Sheave under the Front Powerside
Runway and another two under the two Rear Sheaves under the Rear Powerside Runway.
Put a small amount of white lithium grease or similar on each lubrication point before you use the Lift
and monthly after putting the Lift into service.

Other manuals for BendPak HD-9

Related product manuals