BendPak HDS-14X - Hds-14 X; Step 8; Cable Installation

16
Model Part # Description
A HDS-14 5595065 HDS/HDSO-14/ 14LSX/14LSXE 12 x 4,100mm, Cable "A"
B HDS-14 5595066 HDS/HDSO-14/ 14LSX/14LSXE 12 x 5,732mm, Cable "B"
C HDS-14 5595074 HDS-14/14LSX 12 x 9,339mm, Cable "C"
D HDS-14 5595075 HDS-14/14LSX 12 x 10,964mm, Cable "D"
A HDS-14X 5595065 HDS/HDSO-14/ 14LSX/14LSXE 12 x 4,100mm, Cable “A”
B HDS-14X 5595066 HDS/HDSO-14/ 14LSX/14LSXE 12 x 5,732mm, Cable “B”
C HDS-14X 5595067 HDS-14 / 14LSXE 12 x 10,101mm, Cable "C"
D HDS-14X 5595068 HDS-14 / 14LSXE 12 x 11,726mm, Cable "D"
STEP 8
(Cable Installation)
Fig 8.1
WARNING !
WHEN THE CABLE ADJUSTING NUTS BOTTOM OUT ON THE THREADED END OF THE CABLE
CONNECTOR AND THERE IS STILL SLACK IN THE CABLES, THE CABLES HAVE STRETCHED BEYOND THE
SAFE USEFUL LENGTH AND NEED TO BE REPLACED WITH FACTORY APPROVED CABLE ASSEMBLIES.
DO NOT PLACE WASHERS, SPACERS OR OTHER DEVICES TO “SHORTEN” THE
EFFECTIVE CABLE LENGTH AS DAMAGE TO THE LIFT OR INJURY TO PERSONS MAY OCCUR.
Cable Routing Diagram
A
B
D C