BendPak XPR-10 Series User Manual

XPR-10 Series Two-Post Lifts 18 P/N 5900951 — Rev. D — May 2019
Checking Clearances
For safety purposes, a specified amount of clear space around the Lift is required .
Drawing is a top view. Not necessarily to scale. Not all components shown. Additional distance is
required for the Front and Rear as Vehicles can be driven in or driven off from these directions.

BendPak XPR-10 Series Specifications

General

Capacity	10, 000 lbs
Rise Time	45 seconds
Voltage	220V
Motor	2 HP
Minimum Height	4.5 inches
Overall Height	145" / 3, 683 mm