BendPak XPR-9TS - Floor Plan

9
FLOOR PLAN AND POWER UNIT INSTALLATION
MODEL XPR-9S XPR-9S-LP XPR-9TS
Lifting Capacity 9,000 lbs." / 4082 kg. 9,000 lbs.” / 4082 kg. 9,000 lbs." / 4082 kg.
*Max Capacity/ Front Axle 4,500 lbs." / 2041 kg. 4,500 lbs.” / 2041 kg. 4,500 lbs." / 2041 kg.
*Max Capacity/ Rear Axle 4,500 lbs." / 2041 kg. 4,500 lbs.” / 2041 kg. 4,500 lbs." / 2041 kg.
A -Height Overall; (*) 113” / 2870 mm. 113” / 2870 mm. 113” / 2870 mm.
B -Width Overall -NARROW CONFIGURATION 132" / 3353 mm. 132” / 3353 mm. 132" / 3353 mm.
B -Width Overall -WIDE CONFIGURATION 145" / 3683 mm. 145” / 3683 mm. 145" / 3683 mm.
D- Floor Pan Height: 1-3/4” / 44 mm 1-3/4” / 44 mm 1-3/4” / 44 mm
F -Reach (Front Arm Min.): 27-1/2" / 698 mm 28-1/2” / 724 mm 27-1/2” / 698 mm
G -Reach (Front Arm Max.): 51-1/2” / 1308 mm 47-1/2” / 1206 mm 51-1/2” / 1308 mm
H- Reach (Rear Arm Min.): 34” / 863 mm 28-1/2” / 724 mm 27-1/2" / 698 mm
I- Reach (Rear Arm Max.): 54-1/2” / 1384 mm 47-1/2” / 1206 mm 51-1/2" / 1308 mm
J- Min. Pad Height: 4.25" / 108 mm 4.25” / 108 mm 4.25” / 108 mm
Screw Pad Adjustment: 1.75” / 44.5 mm 1.75” / 44.5 mm 1.75” / 44.5 mm
K- Rise: 72” / 1829 mm 72” / 1829 mm 72” / 1829 mm
L -Max Lift Height (Pad Only):
78"/1981mm 78”/1981mm 78”/1981mm
M - Max Lift Height (2.5" Adapter): 80.5” / 2044mm 80.5” / 2044mm 80.5 / 2044mm
Motor(**) 220 VAC / 60 Hz. 1Ph. 220 VAC / 60 Hz. 1Ph. 220 VAC / 60 Hz. 1Ph.
Time of Full Rise: 45 Seconds 45 Seconds 45 Seconds
Max Load Per Arm: 2,250 Lbs. / 1021 Kg. 2,250 Lbs. / 1021 Kg. 2,250 Lbs. / 1021 Kg.
Emission sound pressure at Operator Position < 70 dB(A)
* For CE compliant countries see errata sheet included with control panel. Special Voltages Available
Upon Request.
The design, material and specications are subject to change without notice.
**Special Voltages Available Upon Request.