BendPak XPR-9 Series - User Manual

1645 Lemonwood Dr.
Santa Paula, CA 93060 USA
Toll Free: (800) 253-2363
Telephone: (805) 933-9970
bendpak.com
XPR-9 Two-Post Lift Series
Installation and Operation Manual
Manual P/N 5900371 — Manual Revision D2 — May 2023
Models:
 XPR-9TF
 XPR-9SBT
Designed and engineered by BendPak Inc. in Southern California, USA. Made in China.
⚠ DANGER
I MPORTANT S AFETY I NSTRUCTIONS , S AVE T HESE I NSTRUCTIONS! Read the entire contents
of this manual before using this product. Failure to follow the instructions and safety precautions in this
manual can result in serious injury or death. Make sure all other operators also read this manual. Keep
the manual near the product for future reference. By proceeding with setup and operation, you
agree that you fully understand the contents of this manual and assume full responsibility
for product use
.
XPR-9TF shown.

BendPak XPR-9 Series Specifications

General

Rise Time	45 seconds
Lifting Capacity	9, 000 lbs
Voltage	230V
Power Requirements	208-230 VAC / 60 Hz / 1 Ph
Minimum Floor Thickness	4 inches

Summary

Introduction

Shipping Information

Safety Considerations

IMPORTANT SAFETY INSTRUCTIONS

Crucial safety instructions to read before use.

Frequently Asked Questions

Components

Specifications

Installation Checklist

Installation

Safety and Site Preparation

Safety rules, electrical prep, clearances, tools, and location selection for installation.

Component Assembly and Routing

Step-by-step guide for assembling lift components and routing systems like cables and hoses.

Electrical Connection and Leveling

Connecting power, installing switches, and ensuring the lift is properly leveled.

Final Operational Testing

Performing operational tests and reviewing the final checklist before putting the lift into service.

Operation

Lift Operation Safety Rules

Critical safety rules to follow before and during lift operation.

Raising and Lowering Vehicles

Procedures for safely raising and lowering vehicles onto the lift.

Understanding Safety Locks

Understanding and using the lift's safety lock positions for secure operation.

Maintenance

Routine Maintenance Schedule

Daily, weekly, and monthly tasks for proper lift upkeep and longevity.

Wire Rope Inspection and Maintenance

Guidelines for inspecting and maintaining wire ropes for safe operation.

Troubleshooting

Parts Drawings