XPR-9 Series Two-Post Lifts
4
P/N 5900371 — Rev. D2 — May 2023
Table of Contents
Introduction 4 Operation 59
Shipping Information 5 Maintenance 68
Safety Considerations 5 Troubleshooting 70
FAQ 8 Wiring Diagrams 72
Components 9 Labels 73
Specifications 11 Parts Drawings 76
Installation Checklist 13 ALI Store 90
Installation 14 Maintenance Log 91
Introduction
This manual describes the following Two-Post Lift models:
• XPR-9TF
• XPR-9SBT
These models are similar, if no distinction is made, then the information applies to both models. If
information applies to only one model, that distinction is mentioned in the text.
More information about the full line of BendPak products is available at bendpak.com.
⚠ DANGER Be very careful when installing, operating, maintaining, or repairing this equipment;
failure to do so could result in property damage, product damage, injury, or (in very
rare cases) death. Make sure only authorized personnel operate this equipment. An
authorized technician must perform all repairs. Do not make modifications to the
unit; this voids the warranty and increases the chances of injury or property
damage. Make sure to read and follow the instructions on the labels on the unit.
This manual is mandatory reading for all users of XPR-9 Series Lifts, including anyone who
installs, operates, maintains, or repairs them. Always keep this manual on or near
the equipment.
Technical support and service is available from your dealer, on the Web at
bendpak.com/support, by email at support@bendpak.com, or by phone at
(800) 253-2363, option 7, then 4.
Online chat is also available at www.bendpak.com click the chat icon.
Scan this QR Code for up-to-date information and videos on the XPR-9 Lift series.
To Next Page
Loading...
Need help?
General
