BendPak XPR-7TR User Manual

INSTALLATION AND OPERATION MANUAL
SHIPPING DAMAGE CLAIMS
When this equipment is shipped, title passes to the
purchaser upon receipt from the carrier.
Consequently, claims for the material damaged in ship-
ment must be made by the purchaser against the trans-
portation company at the time shipment is received.
BE SAFE
Your new lift was designed and built with safety in mind.
However, your overall safety can be increased by proper
training and thoughtful operation on the part of the
operator. DO NOT operate or repair this equipment with-
out reading this manual and the important safety instruc-
tions shown inside.
1645 Lemonwood Dr.
Santa Paula, CA. 93060, USA
Toll Free 1-800-253-2363
Tel: 1-805-933-9970
Fax: 1-805-933-9160
www.bendpak.com
Keep this operation manual near the
machine at all times. Make sure that
ALL USERS read this manual.
7,000 POUND CAPACITY
SURFACE MOUNTED
TWO-POST TURF LIFT
MODEL:
XPR-7TR
VERSION A
PLEASE READ THE ENTIRE CONTENTS OF THIS MANUAL PRIOR TO
INSTALLATION AND OPERATION. BY PROCEEDING YOU AGREE THAT
YOU FULLY UNDERSTAND AND COMPREHEND THE FULL CONTENTS OF
THIS MANUAL. FORWARD THIS MANUAL TO ALL OPERATORS. FAILURE TO
OPERATE THIS EQUIPMENT AS DIRECTED MAY CAUSE INJURY OR DEATH.
REV A 04-11-08

BendPak XPR-7TR Specifications

General

Brand	BendPak
Model	XPR-7TR
Category	Lifting Systems
Language	English

Summary

Safety and Introduction

Key Safety Precautions: READ FIRST

Critical initial safety instructions before operation.

Hazard Definitions and Owner Responsibility

Explains hazard symbols, meanings, and owner's duties for safe operation.

Installer and Operator Protective Equipment

Details necessary personal protective equipment for safe installation and operation.

Installation Procedures

Site Selection and Floor Requirements

Guidelines for choosing the correct location and ensuring proper floor conditions.

Column and Power Unit Installation Steps

Procedures for installing lift columns, top trough, and hydraulic power unit.

Safety Mechanisms and Hydraulic Hose Installation

Steps for installing safeties, safety cables, and hydraulic lines.

Lift Arm and Wheel Cradle Installation

Procedures for attaching lift arms and wheel cradle assemblies.

Operation and Maintenance

Lift Start-Up, Adjustments, and Bleeding

Procedures for initial lift startup, adjustments, and bleeding the hydraulic system.

Safe Lift Operation Guidelines

Comprehensive guide on how to safely operate the lift.

Wire Rope Inspection and Maintenance

Detailed guide on inspecting and maintaining lifting cables.

Troubleshooting and Documentation

Troubleshooting Lift Performance Issues

Solutions for common lift problems like not raising or motor issues.

Maintenance Records Log

Section for logging lift maintenance activities and dates.

Installation Form and Agreements

Documents for pre-installation agreement and post-installation checks.