9
3000 Series Retail Operators Manual 108796 Rev C, 07/05
INTRODUCTION
All of the dispensers shown in this book can be operated in the “Stand Alone” mode (no control console), or using
Bennett Current Loop fuel protocol (interfaced to a 3rd party device directly or via the Bennett model 515 Pump
Controller) OR RS485 interface to a Fleet Management System where only volume data is recorded OR Dual
Pulse Output to a Fleet Management System where only volume data is required.
FEATURES AND CAPABILITIES
1. A self-monitoring pulser will prevent product flow in the event of a malfunction.
2. Diagnostic software system built-in to aid in troubleshooting.
3. A Manager’s access code prevents unauthorized changes of the price per volume settings.
4. 1” high LCD displays which are lighted from the back with high efficiency, low power LEDs for easier view-
ing.
5. An allocation limit can be set from 1 to 999 gallons or 9,999 liters at the dispenser.
6. Maximum Display values for Menu Code 8 option 0 are:
Each Sale Totals
Dollars 9999.99 9,999,999.99
Gallons 999.999 9,999,999.999
Liters 9999.99 99,999,999.99
Price Per Volume 9.999
7. A +3.6 volt DC nickel-cadmium battery retains totals and programmed information in the RAM memory dur
ing power failures for up to 10 days.
8. On board battery that maintains last sale information for 15 minutes in the event of power loss.
9. All units have conformal coated electronic boards to help protect them from moisture or foreign material dam
age. All major electronic board assemblies are environmentally tested and temperature cycled.
10. All major low voltage connectors incorporate gold on gold contacts to prevent oxidation and promote reliabil-
ity.
11. The dispenser meets or exceeds FCC Emission Standards and UL specifications.
12. Dispenser programming is performed from the manager’s keypad or the Local Preset keypad. The manager
keypad is located inside the electronics head.
To Next Page
Loading...
