42 Operating the camera
English
To select White Balance:
1. Press > White Balance.
2. Press or to select a white balance option. The preview result based on
the currently selected white balance is shown on the screen. (When selecting
the manual mode, you must first point the camera at a blank sheet of white
paper or something similar and press the Shutter button for the camera to
detect proper colors.)
3. Press to confirm setting.
ISO
ISO configures the camera’s sensitivity to light. The higher the ISO value, the
brighter picture you can take in a low-light environment. Yet, you may see more
noise in the picture as you increase the ISO value.
To select an ISO value:
1. Press > ISO.
Tungsten Used when subjects lit by tungsten
(incandescent) lighting.
Fluorescent H Adjusts for fluorescent lighting. Corrects the
green hue of fluorescent lighting. Ideal for
indoor photos under fluorescent lighting
without a flash.
Fluorescent L
Manual Used when you want to manually adjust
white balance in a particular lighting
condition.
Icon Description
Automatically sets the ISO value.
Equivalent to color ISO 100/200 film. Used for outdoor
photography in bright sunlight.
Equivalent to color ISO 400/800/1600/3200/6400 film. Used it
in a low-light environment or where the flash light is not
allowed.
• ISO 6400/3200 for resolution of 3M/16:9/VGA under only
Icon Mode Description
GH600 UM - EN.book Page 42 Friday, October 14, 2011 4:33 PM