58 Operating the camera
English
4. Press or to select the target image size to which you want to
reduce.
5. Press to confirm the change and save the image file.
Startup image
Sets the welcome screen when the camera is powering on.
To select a startup image:
1. Press to switch to Playback mode.
2. Press > > Startup Image > or .
• To use the default startup image, select
Default.
• To use a custom image, select My Photos and press or to select an
image.
• To disable the startup image, select
Off.
3. Press .
DPOF
The Digital Print Order Format (DPOF) setting allows you to select images on
the memory card for printing and specify the number of print copies in advance
using the camera. This is extremely convenient for sending the images to a
photo developing service or for printing on a direct print function compatible
printer.
To set up DPOF:
1. Press to switch to Playback mode.
2. Press > >
DPOF.
3. Press or to select one of the following options.
• To set the DPOF setting for one image in a time, select
One. Press or
to select an image.
• To set the DPOF setting for all images in a time, select
All.
• To clear all DPOF settings to initial default, select Reset.
4. Press or to specify the number of copies.
5. Press to decide whether you want to turn the date stamp on.
You cannot resize images in the size of 3:2, 16:9, or VGA, or images captured in
Panorama mode.
GH600 UM - EN.book Page 58 Friday, October 14, 2011 4:33 PM
To Next Page
Loading...
Need help?
General
Weight and Dimensions
