BenQ GH600 - Deleting Files; Slideshow

54 Operating the camera
English
3. Adjust the volume.
• To increase the volume, slide the Zoom lever to .
• To decrease the volume, slide the Zoom lever to .
Slideshow
Sets the time interval for presenting a series of captured image and video files
(first frame only).
To play a slideshow:
1. Press to switch to Playback mode.
2. Press > > Slideshow > or .
3. Change the slideshow settings.
• Use the four-way control to set one of the following slideshow effects:
• Applies a transition effect from left to right.
• Applies a transition effect from upper-left side to lower-right side.
• Applies a horizontal transition effect.
• Applies a vertical transition effect.
• Applies a horizontal transition effect by intersecting an image.
• You can set the interval between 1/3/5/10 seconds.
4. Select whether you want to repeat the slideshow.
5. Select
Start and press to play the slideshow.
Deleting files
Removes selected or all files.
To delete files:
1. Press to switch to Playback mode.
2. Press > >
Delete > or .
3. Select whether to delete this selected file, voice memo only, other selected
file, or all files, and then press .
The volume can be set during playback, but not during rewind, fast forward, or
pause.
If you want to pause it at any time, press . Press again to resume playback.
To stop the slideshow, press .
OK
OK
OK
OK
OK
OK
GH600 UM - EN.book Page 54 Friday, October 14, 2011 4:33 PM