BenQ GP10 - OSD Menu Function Descriptions

Operation
38
Description of each menu
FUNCTION DESCRIPTION
Wall Color
Corrects the projected picture’s color when the projection surface is
not white. See "Using Wall Color" on page 33 for details.
Aspect Ratio
There are four options to set the image's aspect ratio depending
on your input signal source. See "Selecting the aspect ratio" on
page 31 for details.
Auto Keystone
Auto corrects any keystoning of the image.
Keystone
Corrects any keystoning of the image. See "Correcting keystone"
on page 28 for details.
Picture Mode
Settings
Picture Mode
See "Selecting a picture mode" on page 32 for details.
Reference Mode
See "Setting the User mode" on page 32 for details.
This function is only available when User is selected.
Brightness
See "Adjusting Brightness" on page 33 for details.
Contrast
See "Adjusting Contrast" on page 33 for details.
Color
See "Adjusting Color" on page 33 for details.
Tint
See "Adjusting Tint" on page 33 for details.
This function is only available the system format is NTSC.
Sharpness
See "Adjusting Sharpness" on page 33 for details.
Color Temperature
See "Selecting a Color Temperature" on page 33 for details.
Save Settings
Saves the settings made for User mode.
3D Sync Invert
When you discover the inversion of the image depth, enable this
function to correct the problem.
Information
Source
Shows the current signal source.
Resolution
Shows the native resolution of the input signal.
Color System
Shows input system format, NTSC, PAL, SECAM, or RGB.