BenQ LU9245 - Blanking Menu; 3 D Menu

English
44
Blanking menu
• Top
Press
◄
/
►
to adjust the top blanking area on the projected picture.
• Bottom
Press
◄
/
►
to adjust the bottom blanking area on the projected picture.
• Left
Press
◄
/
►
to adjust the left blanking area on the projected picture.
• Right
Press
◄
/
►
to adjust the right blanking area on the projected picture.
• Reset
Press ENTER to set up all Blanking settings to default.
3D menu
• 3D Sync Mode
Press
◄
/
►
to select the 3D sync mode. The options are DLP Link and VESA 3D.
• 3D Mode
Press ENTER to enter the 3D Mode menu. Press
▲
/
▼
to select the 3D format. The options
are Auto, Top-Bottom, Frame Sequential, Frame Packing, Side-By-Side and Off.
• 3D Sync Invert
Press
◄
/
►
to enable or disable 3D Sync Invert.
• 3D Sync Out Delay
Press
◄
/
►
to adjust 3D sync out signal delay.
• 3D Sync Out Reference
Press
◄
/
►
to select the 3D sync out behavior. The options are 3D VESA and Bypass to
another projector.
• Save 3D Settings
Press ENTER to enter the Save 3D Settings menu. Press
▲
/
▼
and ENTER to save the
current 3D settings.
• Apply 3D Settings
Press ENTER to enter the Apply 3D Settings menu. Press
▲
/
▼
and ENTER to apply the
saved 3D settings.