BenQ LW855UST - Page 13

English
13
Introduction
8. Right/ )
Increases the projector volume.
When the On-Screen Display (OSD) menu
is activated, the #2, #3, #5, and #8 keys
are used as directional arrows to select
the desired menu items and to make
adjustments. See "Using the menus" on
page 29 for details.
9. OK
Conrms the selected On-Screen Display
(OSD) menu item.
10. MENU
Turns on the On-Screen Display (OSD)
menu. See "Using the menus" on page 29
for details.
11. Light source indicator light
Indicates the status of the light source.
Lights up or ashes when the light source
has developed a problem. See "Indicators"
on page 51 for details.
12. TEMPerature indicator light
Lights up red if the projector's temperature
becomes too high. See "Indicators" on
page 51 for details.
13. Source selection buttons
(COMPUTER, VIDEO, S-Video,
HDMI 1/2)
Selects an input source for display.
14. AUTO
Automatically determines the best picture
timings for the displayed image. See "Auto-
adjusting the image" on page 26 for
details.
15. MUTE
Toggles projector audio between on and
off.
16. LIGHT MODE
Press to display OSD menu to select
desired light mode.
17. PIC MODE
Press to display OSD menu to select Picture
mode. See "Picture Mode" on page 40 for
details.
18. ASPECT
Selects the display aspect ratio.
19. ZOOM+/ZOOM-
Magnies or reduces the projected picture
size.
20. CONTRAST
Displays the CONTRAST setting bar.
21. FREEZE
Freezes the projected image. See "Test
Pattern" on page 46.
22. TEST PATTERN
Displays the test pattern.
23. QUICK INSTALL
Quickly selects several functions to adjust
the projected image and displays the test
pattern.
24. KEYSTON
Display the 2D Keystone page.
25. INFO
Displays the projector information.
26. BRIGHTNESS+/BRIGHTNESS-
Displays the BRIGHTNESS setting bar.
27. MIC/VOL +/MIC/VOL -
Microphone input level adjustment.
28. 3D
Press to display 3D setup menu.
29. ECO BLANK
Used to hide the screen picture.
Do not block the projection lens from projecting
as this could cause the blocking object to become
heated and deformed or even cause a re.
30. NETWORK SETTING
Displays the Network Settings OSD
menu.