BenQ LW855UST - Using the Menus

English
29
Operations
Using the menus
The projector is equipped with 2 types of On-Screen Display (OSD) menus for making various
adjustments and settings.
• Basic OSD menu: provides primary menu functions. (See "Basic menu" on page 38)
• Advanced OSD menu: provides full menu functions. (See "Advanced menu" on page 40)
To access the OSD menu, press MENU on the projector or remote control.
• Use the arrow keys ( / / / ) on the projector or remote control to move through the
menu items.
• Use OK on the projector or remote control to conrm the selected menu item.
The rst time you use the projector (after nishing the initial setup), Basic OSD menu displays.
The OSD screenshots below are for reference only, and may differ from the actual design.
Below is the overview of the Basic OSD menu.
1
2
3
4
5
6
2
1 Menu Type 4 Press OK to enter
the menu.
2 Main menu 5 Status
3 Current input
signal
6 Press MENU to
go to the previous
page or to exit.
If you intend to switch from the Basic OSD menu to the Advanced OSD menu, follow the
instructions below:
1. Go to Basic Menu > Menu Type.
2. Press OK and press / to select Advanced. Next time when you turn on the projector,
you may access the Advanced OSD menu by pressing MENU.
Below is the overview of the Advanced OSD menu.
1
2
3
4
5
6
7
1 Main menu &
Main menu icon
5 Press BACK to
go to the previous
page.
2 Sub-menu 6 Press MENU to
go to the previous
page or to exit.
3 Current input
signal
7 Status
4 Press OK to
enter the menu.