BenQ LW855UST - Positioning Your Projector; Using the Quick Install

English
15
Positioning your projector
Positioning your projector
Using the Quick Install
The projector provides a hot key to set Projector Position, Test Pattern, 2D Keystone,
Corner Fit and Digital Shrink & Shift quickly.
Press Quick Install on the remote control and press / to select:
• Projector Position: See "Positioning your projector" on page 15.
• Test Pattern: See"Test Pattern" on page 46
• 2D Keystone: See "Correcting 2D Keystone" on page 27.
• Corner Fit: See "Correcting Corner Fit" on page 28.
• Digital Shrink & Shift: See "Digital Shrink & Shift" on page 47.
Choosing a location
Your projector is designed to be installed in one of four possible installation locations:
Front Wall Rear Table Front Table Rear Wall
Use the test pattern