BenQ LW855UST - Page 47

English
47
Menu operation
Image Resizing
Digital Zoom
Magnies or reduces the projected image.
1. After the Zoom bar displays, press repeatedly to magnify the picture
to a desired size.
2. To navigate the picture, press OK to switch to the panning mode and
press the directional arrows ( , , , ) on the projector or remote
control to navigate the picture.
3. To reduce size of the picture, press OK to switch back to the zoom in/
out function, and press AUTO to restore the picture to its original size.
You can also press repeatedly until it is restored to the original size.
The picture can only be navigated after it is magnied. You can further magnify the
picture while searching for details.
Digital Shrink & Shift
Shrinks and/or shifts the projected image.
1. After the adjustment bar displays, press / repeatedly to shrink or
magnify the picture to a desired size.
2. Press OK to activate digital shift function.
3. After digital shift function is activated, press the directional arrows
( , , , ) to shift the image.
4. Press AUTO to restore the picture to its original size.
The picture can only be shifted after it shrank.
Blanking
• Modes of adjustment:
• Top: To adjust the top blanking area on the projected picture
• Bottom: To adjust the bottom blanking area on the projected picture.
• Left: To adjust the left blanking area on the projected picture.
• Right: To adjust the right blanking area on the projected picture.
• Reset all blanking settings: To set up all Blanking settings to default.