BenQ LW855UST - Page 49

English
49
Menu operation
Network
Settings
• Wired LAN
• AMX Device Discovery: When this function is On, the projector can
be detected by AMX controller.
• MAC Address (Wired): Displays the mac address for this projector.
Factory Default
Returns all settings to the factory preset values.
The following settings will still remain: Keystone, Projector Installation, Light
Usage Time, High Altitude Mode, Security Settings, Baud Rate, HDMI
Equalizer, Digital Shrink & Shift, Filter Usage Time.
Reset System
Returns all of the adjustments you’ve made for the System menu to the
factory preset values.
Information
Information
• Native Resolution: Shows the native resolution of the projector.
• Detected Resolution: Shows the native resolution of the input signal.
• Source: Shows the current signal source.
• Picture Mode: Shows the selected mode in the Picture menu.
• Light Source Mode: Shows the selected mode in the Light Settings
menu.
• 3D Format: Shows the current 3D mode.
• Color System: Shows input system format.
• Light Usage Time: Shows the number of hours the light source has
been used.
• Firmware Version: Shows the rmware version of your projector.
• Service Code: Shows the projector serial number.