BenQ LW855UST - Page 59

English
59
Specifications
Function Type Operation ASCII
Audio Control Write Mute On <CR>*mute=on#<CR>
Write Mute Off <CR>*mute=off#<CR>
Read Mute Status <CR>*mute=?#<CR>
Write Volume + <CR>*vol=+#<CR>
Write Volume - <CR>*vol=-#<CR>
Write Volume level for customer <CR>*vol=value#<CR>
Read Volume Status <CR>*vol=?#<CR>
Write Mic. Volume + <CR>*micvol=+#<CR>
Write Mic. Volume - <CR>*micvol=-#<CR>
Read Mic. Volume Status <CR>*micvol=?#<CR>
Audio Source
Select
Write Audio pass Through off <CR>*audiosour=off#<CR>
Write Audio-Computer1 <CR>*audiosour=RGB#<CR>
Write Audio-HDMI <CR>*audiosour=hdmi#<CR>
Write Audio-HDMI2 <CR>*audiosour=hdmi2#<CR>
Write Microphone <CR>*audiosour=microphone#<CR>
Read Audio pass Status <CR>*audiosour=?#<CR>
Picture Mode Write Presentation <CR>*appmod=preset#<CR>
Write sRGB <CR>*appmod=srgb#<CR>
Write Bright <CR>*appmod=bright#<CR>
Write User1 <CR>*appmod=user1#<CR>
Write User2 <CR>*appmod=user2#<CR>
Write 3D <CR>*appmod=threed#<CR>
Write HDR10 <CR>*appmod=hdr<CR>
Write HLG <CR>*appmod=hlg<CR>
Write Spreadsheet <CR>*appmod=spreadsheet#<CR>
Write Video <CR>*appmod=video<CR>
Read Picture Mode <CR>*appmod=?#<CR>
Picture Setting Write Contrast + <CR>*con=+#<CR>
Write Contrast - <CR>*con=-#<CR>
Write Set Contrast value <CR>*con=value#<CR>
Read Contrast value <CR>*con=?#<CR>
Write Brightness + <CR>*bri=+#<CR>
Write Brightness - <CR>*bri=-#<CR>
Write Set Brightness value <CR>*bri=value#<CR>
Read Brightness value <CR>*bri=?#<CR>
Write Color + <CR>*color=+#<CR>