Prepare for Setup6
Instructions for a board surface
Consider the following factors when selecting a board to project to optimized the
interactive quality.
• The board surface require to be semi-glossy or matt.
• The board with glossy and reflected surface is not recommended, the surface will
increase the external light intensity and unexpected interference may happen.
Caution: For a existing glossy board, it is recommend to use the projection film to coverage the existing
surface to get a better interactive quality.
Comparison of the board surface
Surface Board material Performance
Semi glossy/Matt
Dry erase board
Best!
The surface will eliminate
reflection intensity.
Glossy
• General whiteboard
• With Galvanized steel
• With Ceramic steel panel
Risk!
Interference may happen
during writing.
To Next Page
Loading...
