Menu operations 41
Eye-Care solutions
Blue light with wavelengths under 455 nm could affect vision. Eye-Care solution is
designed for eyesight protection: the display provides proprietary eye-care technology
with ultra-low blue light emission and no visible or invisible flicker within the range of 0-
3000Hz, preventing eyestrain caused by extended sessions in front of a display. In
addition, advanced anti-glare screen treatment minimizes distracting reflections and glare
for optimal productivity and comfort.
To activate the smart eye care solution, enable the Eye-Care function under General.
Low blue light & flicker free:
• To accord with Low blue light TUV certificated, the default setting is Picture Mode:
Standard, Brightness: 50, Contrast: 50, and Color Temperature: Standard, and
then enable Eye-Care function.
• To accord with Flicker Free TUV certificated, the default setting is Picture Mode:
Standard, Brightness: 50, Contrast: 50, and Color Temperature: Standard.
Suggestions for long-term use of the display:
• Rest your eyes for 10 minutes after 30 minutes of continuous use.
• For every 20 minutes of display viewing, look into the distance for 20 seconds.
• When your eyes get sore and strained, close your eyes for a minute and then roll your eyes in
all directions.
For more information about Picture settings, refer to Picture settings on page 43.
To Next Page
Loading...
